|
---- 日本ASAHI SUNAC Co. |
|
Highest transfer efficiency, medium & higher paint output
|
|
Micro ACE gun has been designed for circumference improvement with paint saving, precision adjustment, cost reduction.
Environmental friendly high transfer
efficiency auto spray gun! |
|
|
◎Environment friendly New nozzle design to improve pollution, less care for peripheral environment. ◎Cost reduce Contribute to cost saving thanks to high Transfer Efficiency ◎Reject reduce Paint cannot be detained on nozzle, reducing reject from paint pellet. ◎Small and light weight design! Easy to install on Robot and reciprocator, 1 robot could be equipped 2 guns. |
|
Main usage：Simple function machine, robot, reciprocator, all industrial painting.
|
1. Atomizing flying particle granular size vs. transfer efficiency
|
|
 |
A1:
Too fine particle.. frying out A2: Fine particle.. rely on electrostatic wrapping B： Approx. 40µ good atomizing size C： Coarse particle, easily adhere, but bad surface appearance |
| granular size distribution of paint atomized by nozzle | |
| 2. Asahi Sunac Nozzle progress HN54→HN60→New HN70 too fine and coarse particle disappear | |
|
|
|
| 3. New HN70 nozzle w/large paint output and pattern selection range | |
 |
|
| Painting conditions： paint viscosity 20sec/FC#4 | |
|
|
 |
| Nozzle combination | Type |
Nozzle explaination |
Air cap |
||||||
| Part number | Part name | Orifice | Flow rate | Part name | Part number | Nozzle orifice | Pattern | ||
| AGB21 w/0.8mm Nozzle | 138A-5 | 154 C-001 | Paint nozzle | 0.8mm | 100-250 ml/min | 71 Air cap | 154 C-111 | 0.8mm | 250mm |
| AGB21 w/1.1mm Nozzle | 138A-6 | 154 C-002 | Paint nozzle | 1.1mm | 150-400 ml/min | 60 Air cap | 1594-101 | 1.1-1.6mm | 300mm |
| AGB21 w/1.4mm Nozzle | 138A-7 | 154 C-003 | Paint nozzle | 1.4mm | 200-500 ml/min | 70 Air cap | 154 C-101 | 1.1-1.6mm | 300mm |
| AGB21 w/1.6mm Nozzle | 138A-8 | 154 C-004 | Paint nozzle | 1.6mm | 250-600 ml/min | ||||
