Pearl AGB40 ----  日本ASAHI SUNAC Co. 
Spindle & 3C industry LVLP gun

Micro adjustment

 Pearl gun be developed for --solving small paint output problem

Environmental friendly high transfer efficiency auto spray gun!
Pursues high transfer efficiency, as well as high qulaity thin film beautiful coating!

◎Environment friendly

    New nozzle design to improve pollution, less care for peripheral  environment.

◎Cost reduce

    Contribute to cost saving thanks to high Transfer Efficiency

◎Reject reduce

    Paint cannot be detained on nozzle, reducing reject from paint pellet.

◎Small and light weight design!

     Easy to install on Robot and reciprocator, 1 robot could be equipped 2 guns.
  1. Lower particle grow rate, higher yield rate！
  2. Paint w/hardener, less same color particle problem, increase yield rate!
  3. Precisely paint output volume adjustment, save paint, increase quality!
  4. Low pressure＋closing spray, increase transfer efficiency！

   Main application： Spindle coating line, special purpose coater, robot, 3C precision coating, etc.

　 1. output demand could be precision adjusted 　 　 　
　 →Transfer efficiency up, quality up! 　 　 　
　 　 　 　
　 * Multi-spray gun coater, less output on each gun, very difficult to adjust the small output 20~60cc/min. 　 　 　
　 2. Low pressure & short distance spraying possible, with good color tone. 　 　 　
　 → Transfer efficiency up 　 　 　
　

　 　 　
　 * Within the pattern, even paint distribution, 1/3~1/4 pattern overlapping could achieve homogeneous film thickness, paint saving, high quality。 　 　 　
　 3. Cap & nozzle running time extended--solve nozzle, cap pollution 　 　 　
　 →Paint dust solution, productivity, operative up 　 　 　
　

　

 　 　 　
　

＊ conveyor speed 6-7m/min., high speed, dry oven longer, most of plant using short drying paint, therefore nozzle dry on the nozzle and become clogging.

 　 　 　
　 4. Cellular phone spray condition comparison--short distance, low air pressure, high yield rate 　 　 　
　        Paint：Pear mica paint(PU 2 components paint) output volume：30∼50ml/min 　 　 　
　
　 AGB40 conventional Other co.
Atomizing air  (Mpa) 0.13~0.22 0.16`0.30 0.4
Pattern air (Mpa) 0.02~0.10 0.02~0.17 -
Spray distance (mm) 100~120 120~180 120~170
Max. reject(%) 14 43 35
　 　 ﹛
　

＊Even pattern distribution, less color difference, high atomizing, consiquence gun could be closer to workpiece & low air pressure capable to finish job and get high trsfer efficiency.

 　 　 ﹛

　

AGB40 Peral
Nozzle combination Model number Nozzle specifications (one version only) Air caps　
Part no. Part name Oriffice  Flow rate Part name Part no. Nozzle orif. Pattern application
AGB40 with 1.0mm nozzle 139E 139E-003 Paint nozzle 1.0mm 20 - 60 ml/min 40 Air cap 139E-005 1.0mm 100mm Spindle line, 3C robot line
41 Air cap 155F-001 AGB40 only 150mm large pattern of MGB30 manual gun, robot line