|
- | |
 |
 |
| Comparison between air / air electrostatic atomizing | ||||
| 1 | Air atomizing | Air electrostatic atomizing |
 | |
| 2 | Principle | Middle pressure | Low pressure | |
| 3 | Electrostatic use | Non | Electrostatic | |
| 4 | Atomizing pressure approx. | 2kg/cm2 | 1.0kg/cm2 | |
| 5 | Painted efficiency | 45~65 % | 60~80 % | |
| 6 | Spray gun output volume | 300cc/min | 300cc/min | |
| 7 | Spray speed(Reference) | 3m2/Min. | 4m2/Min. | |
| 8 | Atomizing granular | 25~45µ | 25~45µ | |
| 9 | Operation skill | High | High | |
| 10 | Control method | Difficult, high cost | Difficult, high cost | |
| 11 | Touch-up | High | High | |
| 12 | Application | Automobile, motor cycle, household appliances, construction material | ||
| RA20 Extension high voltage EST bell A type： | ||||
|
|
Applications | |||
|
Advantages |
1 |
High painting efficiency |
1.0kg/cm2 middle atomizing pressure, high granular, low fluid speed, 15m/s, compare with tradition one, less turn over, good wrapped |
Automotive, motorcycle, household appliances, construction material, metal or wooden furniture |
|
2 |
Long life, less parts |
Long usage and reliable of best tungsten steel needle and seat, self-tight sealing. | ||
|
3 |
Special new technology - circular to gun |
Improve EST gun, no paint circle to gun head and no silver powder precipitation and causes gun jammed and bad atomizing, no too much waste cleaning solvent and paint. | ||
|
4 |
non-hose explosion design |
Gun on/off and circle valve are in the front of gun, with difference design of contrary/sequence, to avoid valve jammed, bad hose explosion, increase reliable. | ||
|
5 |
Safety |
HV system, with over currency or over voltage, auto cut-off, safety protection system. | ||
|
6 |
Easy maintenance |
Wire, spray gun protection sleeve, to avoid the pollution on gun and wires, good outer view, easy for plastic paper wrapping. | ||
|
7 |
Selection of nozzle |
To choice proper nozzle for each different objects, flat nozzle, round nozzle, metal round nozzle. | ||
|
8 |
Free change for pattern(Special option) |
Base on object's shape, flat nozzle, metal nozzle could be adjusted for best pattern and atomizing fly speed by remote control. | ||
| RA20 Integration HV EST bell, B type: | ||||
|
|
Applications | |||
|
Advantages |
1 |
High paint efficiency |
1.0kg/cm2middle atomizing pressure, high granular, low fluid speed, 15m/s, compare with tradition one, less turn over, good wrapped |
Automotive, motorcycle, household appliances, construction material, metal or wooden furniture |
|
2 |
Long life, less parts |
Long usage and reliable of best tungsten steel needle and seat, self-tight sealing. | ||
|
3 |
Special new technology - circular to gun |
Improve EST gun, no paint circle to gun head and no silver powder precipitation and causes gun jammed and bad atomizing, no too much waste cleaning solvent and paint. | ||
|
4 |
non-hose explosion design |
Gun on/off and circle valve are in the front of gun, with difference design of contrary/sequence, to avoid valve jammed, bad hose explosion, increase reliable. | ||
|
5 |
Safety |
HV system, with over currency or over voltage, auto cut-off, safety protection system. | ||
|
6 |
Easy maintenance |
Wire, spray gun protection sleeve, to avoid the pollution on gun and wires, good outer view, easy for plastic paper wrapping. | ||
|
7 |
Selection of nozzle |
To choice proper nozzle for each different objects, flat nozzle, round nozzle, metal round nozzle. | ||
|
8 |
Free change for pattern(Special option) |
Base on object's shape, flat nozzle, metal nozzle could be adjusted for best pattern and atomizing fly speed by remote control. | ||
Parameters of nozzle selection：
| Type | Stainless round nozzle | Plastic steel round nozzle | Flat nozzle |
|---|---|---|---|
| Specification | RS 10A | RP30,45 | FP09, 11, 14 |
| Pictures |
 |
 |
 |
| Orifice mm | 2.2 | 1.2 | 0.9, 1.1, 1.4 |
| Paint output volume | 30~350cc/Min. | 30~400cc/Min. | 30~300cc/Min. |
| Atomizing air Mpa | 0.08~0.4 | 0.08~0.4 | 0.05~0.6 |
| Pattern Max. mm | 300 | 300 | 350 |
| Air consumption volume NL/MIN | 180 | 200 | 330 |
| Application | Pipes, high productivity | Pipes, more clean | Panels, complex objects |
| Type | LE20 A Type | LE20 B Type | |
|---|---|---|---|
| HV unit | Extension | Integration | |
| HV controller | BPS 100 Type | IPS 920 | |
| Spray gun | L x diameter | 330×∮96 mm | 330×∮96 mm |
| Weight | 1,900g | 2,040g | |
| Nozzle | Flat nozzle | Standard | Standard |
| Metal/plastic-steel round nozzle | Optional | Optional | |
| Valve | Paint valve | Yes | Yes |
| Gun head circle valve | Yes | Yes | |
| Waste paint valve | Optional | Optional | |
| Air consumption volume | 450NL/min. | 450NL/min. | |
| Resistor | 50 Meg-Ohm | 150 Meg-Ohm | |
| Gun Cover | Yes | Yes | |
| Weight (gun w/support) | 2.94kg | 3.048kg | |
|
|
型號 | CCV10-4c1s1a | CCV11-4c1s1a | ||
| Main characteristics | Plastic-steel needle + S.S seat | Tungsten steel needle & seat | |||
| (4 colors＋1 solvent＋1 air) | Serial No. | Q'ty | Serial No. | Q'ty | |
| L plastic steel joint for 6x8 paint hose | 1 | 4 | 1 | 4 | |
| L plastic steel joint for 6x8 paint hose | 2 | 4 | 2 | 4 | |
| Head Valve block | 3 | 1 | 3 | 1 | |
| Auto paint valve | 4 | 6 | 4 | 6 | |
| L joint for M5 4x6 air hose | 5 | 6 | 5 | 6 | |
| Right/left SS frame | 6 | 2 | 6 | 2 | |
| Tail valve block | 7 | 1 | 7 | 1 | |
| Output straight joint for 4x6 paint hose | 8 | 1 | 8 | 1 | |
|
O-Ring, Viton between valve block |
9 | 1 | 9 | 1 | |
|
|
Orifice mm | 2.0 | 2.5 | ||
| EST High voltage generator | ||
| Type | BPS 100 extension | IPS920 Integration |
|
|
 | |
| Constant voltage output | Auto upgrade, constant voltage, good electrostatic wrapped | Constant current, good electrostatic wrapped |
| Safety circular | Folded back circuit, earthing current reduce to half without spark | Non folded back circuit, earthing current down low, no spark |
| Input voltage | 220volt, 50- 60 Cycles | 220volt, 50- 60 Cycles |
| Power consumption | approx.100 VA | approx. 80 VA |
| Protection system | IP 55 | IP 54 |
| Output voltage | 100KV negative | 90KV negative |
| Output current | Max. 300Micro-Amp adjustable | Max. 120Micro-Amp un-adjustable |
| Size | Approx. HxDxW:200x400x200mm | Approx: L x dia. 285xφ40mm |
| Weight | Approx.15.7kg | Approx. 250g(cascade) |
| Radio class | FN | FN |
| Current auto cutting | 300 UA high sensoring cut off | 80~150UA sensoring cut off |
| Back up | Push reset bottom when over current or current system shut-down automatically | Auto jump off while over current, re-switch for restarting |
| Suitable environment | 0 - 40 ℃ | 0 - 40 ℃ |
 |
Gear pump paramter： | ||||
|
|
GP10-1.8 | GP10-3 | GP10-6 | GP30-1.8 explosion-proof | |
| Proper paint | Pure color, metallic paint | ||||
| CC fluid volume read | Digital display | Digital display | Digital display | Digital display/non | |
| Paint output CC/rpm | 1.8 | 3 | 6 | 1.8 | |
| Paint output CC/min. | 20~260 | 35~430 | 60~850 | 20~260 | |
| Driven motor control | AC pressure adjust/ | AC pressure adjust/ | AC pressure adjust/ | AC pressure adjust/ | |
 |
Paint output adjust | Non-section remote-control | Non-section remote-control | Non-section remote-control | Non-section remote-control |
| Material | Stainless steel | Anti-erode alloy | Anti-erode alloy | Stainless steel | |
| Driving power | AC220Vx 1Ф50/60Hz 90W | ||||
| Weight, incl. Hose and coupling | 7.5 | 8 | 8.5 | 10 | |
| Special specification: | S.S. made, Ti plated, Artificial diamond, T joint for quick cleaning, high isolation, high explosion-proof | ||||
|
|
電動升降機參數： | ||||
|
|
Vertical |
Horizontal | |||
|
Type |
VR |
VRF-1 |
VRF-2 |
HR | |
|
Stroke change |
Changeable |
Fixed |
Fixed |
Changeable | |
|
Trail design |
Special |
Liner slider |
Liner slider Balance hammer |
Special | |
|
Loading weight Max. |
40 |
40 |
60 |
40 | |
|
Max. stroke, M |
1.5/2.0/2.5/3.0 |
1.5/2.0 |
1.5/2.0/2.5/3.0 |
1.5/2.0/2.5/3.0 | |
|
Speed, M/ min. |
15 - 45 |
15~60 |
15 - 45 | ||
|
Control |
Frequency converter |
Frequency coneerter | |||
|
Protection level |
IP54 |
IP54 | |||
|
Motor |
380V, 50/60 Hz |
380V, 50/60 Hz | |||
|
Output |
3 Hp, 4 pole |
2 Hp 4 Pole |
3Hp, 4 pole |
3 Hp, 4 Pole | |
|
Direction change |
Electrical auto compensation |
Accuracy bearing direction block |
Electrical auto compensation | ||
| Outer dimension, H/M |
2.5/3/3.5/4 |
||||
