Auto Spray Gun - for painting robot only:
|
|
|
Model |
LA30x65 |
LA30x90 |
|
Spray gun angle |
65ﾟ |
90ﾟ |
||
|
Gun Inlet pressure (Mpa） |
0.25 |
0.25 |
||
|
Air cap pressure:（Mpa） |
0.20 |
0.20 |
||
|
Air consumption/min.） |
280 |
280 |
||
|
Weight Kg: incl. gun bracket, flange |
2+0.2 |
2.2+0.4 |
||
|
Max. paint pressure (kg/cm2) |
5 |
5 |
||
|
Air speed:（m/sec.） |
16 |
16 |
||
|
Painting effect:（﹪） |
Approx. 74 |
Approx. 74 |
||
|
LA30x90x1 |
LA30x65x2 |
Output volume( while painting pressure is 5kg/cm2) CCM/min |
800 |
800 |
|
|
Controlled air pressure（Min. ~ Max.）kg/cm2 |
5~8 |
5~8 |
|
|
Wasting solvent vavle |
Option |
Option |
||
|
Gun size: L mm |
300 |
300 |
||
|
Features |
Quick disassembly, lightly auto gun, use famous brand, cheaper parts, easy maintenance and replacement by simplified screw, no need to remove pipes, saving time and human power, constant angle without correct , multi-selections for enamel and wearing paint material. |
|||
1.2 LE 30 (Inner piping) flat nozzle - air atomizing EST auto gun：
|
|
Model | LE30 |
| Weight incl. paint hose and gun bracket | Approx. 3500 | |
| Max. Voltage (kv) | 90 | |
| Outer resistance: Meg-Ohm | 50 | |
| Paint max. pressure: kg/cm2 | 5 | |
| Atomizing air max. pressure: kg/cm2 | 6 | |
| Pattern air max. pressure: kg/cm2 | 6 | |
| Controlled air pressure（Min.~Max.）kg/cm2 | 5~8 | |
| Air consumption: L/min | 350, air cap pressure:5kg/cm2 | |
| Paint output volume: CCM/min | Approx. 800, paint pressure5kg/cm2 | |
| Air cap |
FP1.1 Standard (FP0.8, FP1.6 Option) |
1.3 LE 31 (Inner piping) S.S. round nozzle- air atomizing EST auto gun：
|
|
Model | LE31 |
| Weight incl. paint hose and gun bracket: g | Approx. 3800 | |
| Max. Voltage (kv) | 90 | |
| Outer resistance: Meg-Ohm | 50 | |
| Paint max. pressure: kg/cm2 | 5 | |
| Atomizing air max. pressure: kg/cm2 | 6 | |
| Pattern air max. pressure: kg/cm2 | 6 | |
| Controlled air pressure (Min.~Max.）kg/cm2 | 5~8 | |
| Air consumption L/min | 220, air cap: 3kg/cm2 | |
| Paint output volume: CCM/min | Approx. 600, paint pressure: 5kg/cm2 |
1.4 RA 30 New model (Inner piping) High-speed rotary atomizing auto gun：
|
|
Model | RA30 |
| Weight incl. paint hose and gun bracket: g | 5500 | |
| Max. voltage: (kv) | 100 | |
| Outer resistance: Meg-Ohm | 50 | |
| Ratio of air motor（exclud. spray cup）Max. | 60,000rev./min | |
| Max. air pressure of motor: | 6 kg/cm2 | |
| Max pressure- paint kg/cm2 | 3 | |
| Atomizing air- Max. kg/cm2 | 6 | |
| Max. pattern air: kg/cm2 | 6 | |
| Controlled air （Min.~Max.）kg/cm2 | 4~7 | |
| Air consumption (Motor:4bar, shower air: 3bar)L/min | 300 | |
| Paint output volume CCM/min | 600, paint pressure3kg/cm2 |
Quick Color Change Valve:
2.1 CCV10 New model plastic-steel quick color change valve-constant return flow：
|
|
Model | CCV10-4c1s1a | CCV11-4c1s1a | ||
| Plastic needle + SUS seat | Tungsten carbide needle, seat | ||||
| (4 colors＋1 solvent ＋1 air) | Series No. | Q'ty | Series No. | Q'ty | |
| L coupling for 6x8 paint hose | 1 | 4 | 1 | 4 | |
| L coupling for 6x8 paint hose | 2 | 4 | 2 | 4 | |
| Valve block | 3 | 1 | 3 | 1 | |
| Auto paint valve | 4 | 6 | 4 | 6 | |
| L coupling M5, for 4x6 air hose | 5 | 6 | 5 | 6 | |
| SS flame for left/ right | 6 | 2 | 6 | 2 | |
| End valve block | 7 | 1 | 7 | 1 | |
| Output direct coupling, for paint hose 4x6 | 8 | 1 | 8 | 1 | |
|
O -ring Viton between valve blocks |
9 | 1 | 9 | 1 | |
|
|
Hole size mm | 2.0 | 2.5 | ||
2.2 CCV20 New model plastic-steel quick color change valve- controlled return flow：
|
|
型號 | CCV-20-2c1s1a | |
| (2 colors＋1 solvent ＋1 air) | Series No. | Q'ty | |
| L coupling for 6x8 paint hose | 1 | 2 | |
| L coupling for 6x8 paint hose | 2 | 2 | |
| Valve block | 3 | 1 | |
| Auto paint valve | 4 | 4 | |
| L coupling M5, for 4x6 air hose | 5 | 4 | |
| SS flame for left/ right | 6 | 2 | |
| End valve block | 7 | 1 | |
| Output direct coupling, for paint hose 4x6 | 8 | 1 | |
|
O -ring Viton between valve blocks |
9 | 1 | |
|
|
Hole size mm | 2.5 | |
2.3 CCVAB New model plastic-steel, AB colors quick color change valve:
|
|
Model | CCV-AB-15c1s1a | |
| Series No. | Q'ty | ||
| Module designing | |||
|
Valve designed as 1. non-circulation-single head 2. Twin head, circulation |
|||
|
Valve body made by plastic-steel with max. paint dia. 9mm, easy clean, low pressure |
|||
| Easy to change valve seat | |||
|
Proper for water base and solvent base mater |
|||
2.4 CCV21 New model SS quick color change valve
|
|
Model | CCV-21-2c1s1a | |
| (2 colors ＋1 solvent＋1 air) | 係號 | 數量 | |
| L S.S coupling for paint hose 4x6 | 1 | 4 | |
| Valve block | 2 | 1 | |
| Auto paint valve | 3 | 4 | |
| L couplingM5, for air hose 4x6 | 4 | 4 | |
| S.S. flame, left/ right | 5 | 2 | |
| End valve block | 6 | 1 | |
| Straight coupling, for paint hose 4x6 | 7 | 1 | |
|
O-ring Viton for vavle blocks |
8 | 1 | |
Paint precision gear pump:
|
|
Gear pump parameters： | ||
| Model | GP30-1.8 | GP30-3 | |
| Proper paint material | Metallic paint, color paint | Metallic paint, color paint | |
| Display of output volume CC | Digital | Digital | |
| Paint output CC/rev. | 1.8 | 3 | |
| Driven motor | AC Frequency | AC Frequency | |
| Rotation of pump: RPM | 10~150 | 10~150 | |
| Paint output adjustment: | Non-section remote-control | Non-section remote-control | |
| Material | Stainless Steel | Anti-corrode Alloy | |
| I/O analogue control | Available | Available | |
| Weight incl. paint hose & coupling: Approx. g | 7500 | 8000 | |
| Driven power | AC 220Vx W 50/60Hz | AC 220Vx W 50/60Hz | |
| Explosion-proof | Internal pressure explosion-proof | Internal pressure explosion-proof | |
| Special Spec. | Made by S.S, plate with Ti/ artificial diamond, T-joint for quick clean, high conductive, high explosion-proof | ||
Work-piece supply unit:
4.1 TF1900 Twin supply unit：
| 1 | P/N | TF1900-15/25-C | TF2400-15/25-C | TF3100-15/25-C | TF1900-15/25-S | TF2400-15/25-S | TF3100-15/25-S | ||||||
| 2 | Installation | elevated | elevated | elevated | elevated | elevated | elevated | ||||||
| 3 | Object plate mm | 300∮ | 300∮ | 300∮ | 300∮ | 300∮ | 300∮ | ||||||
| 4 | Load Kg( Standard 600x600mm) | 15 | 25 | 15 | 25 | 15 | 25 | 15 | 25 | 15 | 25 | 15 | 25 |
| 5 | Pitch of Left/ right plate | 1600∼1800㎜, adjustable |
2110㎜ |
1700∼2500㎜, adjustable | 1600∼1800㎜, adjustable |
2110㎜ |
1700∼2500㎜, adjustable | ||||||
| 6 | Plate turning | 90°, 180° | 90°, 180° | 90°, 180° | Free set-up | Free set-up | Free set-up | ||||||
| 7 | Driven | Cam positioning | Cam positioning | Cam positioning | Servo motor | Servo motor | Servo motor | ||||||
| 8 |
Speed, sec. |
0.5/90°, 1/180° | 1/90°, 1.5/180° | 0.5/90°, 1/180° | 1/90°, 1.5/180° | 0.5/90°, 1/180° | 1/90°, 1.5/180° | 0.5/90°, 1/180° | 1/90°, 1.5/180° | 0.5/90°, 1/180° | 1/90°, 1.5/180° | 0.5/90°, 1/180° | 1/90°, 1.5/180° |
| 9 | Rotary position accuracy | ±0.01ﾟ | ±0.01ﾟ | ±0.01ﾟ | ±0.01ﾟ | ±0.01ﾟ | ±0.01ﾟ | ||||||
| 10 | Driven motor | 60W | 60W | 60W | 400W, servo | 400W, servo | 400W, servo | ||||||
| 11 | Steering | Clockwise | Clockwise | Clockwise | Clockwise/Reverse | Clockwise/Reverse | Clockwise/Reverse | ||||||
| 12 | Stroke mm | 1900 | 2400 | 3100 | 1900 | 2400 | 3100 | ||||||
| 13 | Moving time/sec | 5 sec | 5 sec | 6 sec | 5 sec | 5 sec | 6 sec | ||||||
| 14 | Forward positioning accuracy mm | ±2mm | ±2mm | ±2mm | ±2mm | ±2mm | ±2mm | ||||||
| 15 | For/backward driven | Frequency Motor | Frequency Motor | Frequency Motor | Frequency Motor | Frequency Motor | Frequency Motor | ||||||
| 16 | For/backward power HP | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | ||||||
| 17 | Safety-protection | Internal pressure explosion-proof | Internal pressure explosion-proof | Internal pressure explosion-proof | Internal pressure explosion-proof | Internal pressure explosion-proof | Internal pressure explosion-proof | ||||||
| 18 | Controller | P.L.C. | P.L.C. | P.L.C. | P.L.C. | P.L.C. | P.L.C. | ||||||
| 19 | Weight: Kg | 540 | 580 | 630 | 550 | 590 | 640 | ||||||
| 1 | P/N | TF1900-30/50 | TF1900-30/50-C | ||
| 2 | Installation | elevated | floor mounted | ||
| 3 | Object plate mm | 300∮ | 300∮ | ||
| 4 | Load Kg( Standard 600x600mm) | 30 | 50 | 30 | 50 |
| 5 | Pitch of Left/ right plate | 1600∼1800㎜, adjustable | 1600∼1800㎜, adjustable | ||
| 6 | Plate turning | no | 90°, 180° | ||
| 7 | Driven | no | Cam positioning | ||
| 8 |
Speed, sec. |
no | no | 0.5/90°, 1/180° | 1/90°, 2/180° |
| 9 | Rotary position accuracy | no | ±0.01ﾟ | ||
| 10 | Driven motor | no | 200W | ||
| 11 | Steering | no | Clockwise | ||
| 12 | Stroke mm | 1900 | 1900 | ||
| 13 | Moving time/sec | 6 | 7 | 6 | 7 |
| 14 | forward positioning accuracy mm | ±2mm | ±2mm | ||
| 15 | Running driven | frequency motor | frequency motor | ||
| 16 | Running power HP | 1 | 1 | ||
| 17 | Safety-protection |
|
|
||
| 18 | Controller | P.L.C. | P.L.C. | ||
| 19 | Weight: Kg | 450 | 650 | ||
4.2 SF1200 Turn table：
| 1 | P/N | SF1200-15/25-C | SF1200-15/25-S | CSF1500-20-C | CSF1700-20-C | ||
| 2 | Description | "一" Turning table | "一" Turning table | "+" Turning table | "+" Turning table | ||
| 3 | Plate mm | 300∮ | 300∮ | 260x500 | 260x500 | ||
| 4 | Pitch: mm | 1200 | 1200 | 1500 | 1700 | ||
| 5 | Max. object: mm | 800x800 | 800x800 | 800x400 | 800x400 | ||
| 6 | Loaded Kg( standard putting600x600mm) | 15 | 25 | 15 | 25 | 20(Object & clam) | 20(Object & clam) |
| 7 | Turning | 90°, 180° | Continuous turning, ，could be clockwise then reserves | 90°, 180° | 90°, 180° | ||
| 8 | Plate driven | Flange Scission | Servo motor | Flange Scission | Flange Scission | ||
| 9 | Speed Sec./ degree | 0.5/90°, 1/180° | 1/90°, 1.5/180° | 0.5/90°, 1/180° | 1/90°, 1.5/180° | 0.5/90°, 1/180° | 0.5/90°, 1/180° |
| 10 | Motor | Rotary60W, revolution200W | Rotary servo 400W, revolution200W | Rotary200W, revolution400W | Rotary200W, revolution 400W | ||
| 11 | Table continuous turning | 0∼120RPM | |||||
| 12 | Selection | 180° clockwise/reserve | 180°clockwise/reserve | 90° clockwise | 90° clockwise | ||
| 13 | Select speed, sec. | 4 | 4 | 4 | 5 | ||
| 14 | Select fix precision |
±30 |
±30 |
±30
|
±30
|
||
| 15 | Parameter set up | I/O | I/O | ||||
| 16 | Function 1 | Random set-up | 4 difference programs separately for 4 plates | 4 difference programs separately for 4 plates | |||
| 17 | Function 2 |
|
Self-check Inspect machine situation
|
Upper/ Lower loading area with pneumatic for separating loaded object |
Upper/ Lower loading area with pneumatic for separating loaded object |
||
| 18 | Weight Kg | 300Kg | 350Kg | 600Kg | 660Kg | ||
Remark: The above specification is for reference only, each specification should be supplied in accordance with quotation.
