Picture of UTG ¡@

Deutsche Version

Wall Thickness Gauges
UTG-Alpha®
UTG-Beta®

The logo of SaluTron

Maxi-Power in Pocket-Format

UTG-Alpha®
The UTG-Alpha® is a user-friendly combination gauge for the non-destructive ultrasonic thickness measurement of steel, cast-iron, aluminium, glass, ceramic and synthetic wall thickness. The measuring range for steel is 0.8 to 225 mm. Special sensor heads with different diameters and different frequencies are available for different applications. All sensors are recognized automatically and calibrated.

UTG-Beta®
The UTG-Beta® is a highly accurate non-destructive ultrasonic thickness gauge for steel only. The measuring range for this gauge is 1.2 to 200 mm. This gauge sports a high quality of craftsmanship and user-friendly ease of operation, and is delivered with the standard sensor PT-5 and the mandatory instrument-case.

Features:
  • Automatic determination of sound velocity of material
  • High accuracy of measurement even for small sample pieces
  • User-friendly
  • Light-weight for portability
  • Large back-lit LCD display
  • Battery capacity indication
  • Average battery operating time of 250 hours and 30 hours with illumination
  • Hard-wearing sensor head
  • Plug-in sensors for ease of exchange
  • The sensors are equipped with a 1.6 m long integrated cable

  • Standard scope of delivery includes PT5 sensor, instrument case, couplant and batteries

  • Optional: lockable aluminium case

For more Information

 

  

UTG-Alpha®

UTG-Beta®

Measuring technique:

   Measurement of first echo: transmit-receive sensor

Indication:

   4 digit LCD 10 mm high
metric/inch with backlight metric

Measuring range:

   0,8 - 225 mm depending on test material and chosen sensor 1,2 - 200 mm in steel

Measuring accuracy:

  ajustable + 0,01 mm ajustable + 0,1 mm

Resolution:

   for 0,8 - 99,99 mm = 0,01 mm
for 100,0 - 225,0 mm = 0,1 mm		 0,1 mm

Sound velocity range:

   500 bis 9999 m/sec. 5900 m/sec.

Display speed:

   2 times/sec.

Memory:

   40 measurements none
Auto memory:   until next measurement
Auto-off:   after 3 minutes after 2 minutes
Coupling indicator:   as per display
Power supply:   2 x 1,5 V alkaline LR6 batteries 1,5 V alkaline LR6 battery
Battery indication:   as per display
Couplant:   tube with 100 ccm
Operating temperature range:   -10¢XC - +40¢XC
Dimensions:   124 x 67 x 20 mm 107 x 60 x 15 mm
Weight:   240 g 100 g

Sensors for UTG-Alpha®
Standard sensor PT-5
 Suitable for steel, non-ferrous metals, aluminium with its alloys, synthetics, ceramics, glass.
Range: 0,8 - 225 mm in steel
Surface temperature: -10¢XC - +50¢XC
Frequency: 5 MHz
Contact surface diameter (£X): 10 mm
Connector: direct
High temperature sensor GT-5
 Suitable for steel, non-ferrous metals, aluminium with its alloys, synthetics, ceramics, glass.
Range: 2,5 - 200 mm in steel
Surface temperature: -10¢XC - +400¢XC
Frequency: 5 MHz
Contact surface diameter (£X): 12 mm
Connector: direct
Special miniature sensor XT-5
 For measurements on small pipes, curved material, edges, small contact areas and where the area of accessibility is limited.
Range: 1,0 - 30 mm in steel
Surface temperature: -10¢XC - +50¢XC
Frequency: 5 MHz
Contact surface diameter (£X): 7 mm
Connector: right-angled
Cast-Iron sensor CT-2,5
 For measurements on material with high signal attenuation such as cast-iron and synthetics.
Range: 2,5 - 225 mm in steel
Surface temperature: -10¢XC - +50¢XC
Frequency: 2,5 MHz
Contact surface diameter (£X): 10 mm
Connector: direct
Technical data subject to change without notification